Removal [10/2022 - 11/2023]: Procedure

Refer to REMOVAL [10/2022 - 11/2023]

1. Disconnect the fuel tank pressure sensor (vapor pressure sensor) connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Remove the tube joint clip and pull off the fuel tank pressure sensor (vapor pressure sensor) from the fuel suction plate sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	Fuel Tank Pressure Sensor (Vapor Pressure Sensor)
   *2	Fuel Suction Plate Sub-assembly
   *3	Tube Joint Clip
   *a	O-ring

   NOTE:

   • Remove any dirt or foreign matter on the fuel tank pressure sensor (vapor pressure sensor) before performing this work.
   • Do not allow any scratches or foreign matter to get on the parts when disconnecting them as the fuel tank pressure sensor (vapor pressure sensor) has an O-ring that seals the fuel suction plate sub-assembly.
   • Perform this work by hand. Do not use any tools.
   • If the fuel suction plate sub-assembly and fuel tank pressure sensor (vapor pressure sensor) are stuck, carefully wiggle or push and pull the fuel tank pressure sensor (vapor pressure sensor) to release it. Pull the fuel tank pressure sensor (vapor pressure sensor) off the fuel suction plate sub-assembly carefully.