DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Engine Mechanical System (A25A-FXS) - Service Information (1 Of 3)) >> Front Crankshaft Oil Seal >> Removal [10/2022 - 11/2023] >> Procedure

Removal [10/2022 - 11/2023]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE 

    Refer to REMOVAL [10/2022 - 11/2023]

  2. REMOVE CRANKSHAFT PULLEY ASSEMBLY 

    Refer to PROCEDURE - Step 22

  3. REMOVE TIMING CHAIN COVER OIL SEAL 
    1. Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain cover oil seal.
      GTY745111Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
      NOTE:

      After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

Diesel-Data.com