DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Lubrication System (A25A-FXS) - Service Information) >> Oil Pressure And Temperature Sensor >> Removal [12/2019 - ] >> Procedure

Removal [12/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY 

    See step  1

  2. REMOVE OIL PRESSURE AND TEMPERATURE SENSOR 
    1. Disconnect the oil pressure and temperature sensor connector.
    2. Using a 24 mm deep socket wrench, remove the oil pressure and temperature sensor.
      GTY932506Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      If the oil pressure and temperature sensor is dropped or subjected to a strong impact, replace it with a new one.

Diesel-Data.com