DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Lubrication System (A25A-FXS) - Service Information) >> Oil Pump >> Removal [12/2019 - 10/2022] >> Procedure

Removal [12/2019 - 10/2022]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE TIMING CHAIN COVER ASSEMBLY 

    Refer to REMOVAL [12/2019 - 10/2021] , or refer to REMOVAL [10/2021 - 10/2022]

  2. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 57

  3. REMOVE OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 58

  4. REMOVE ENGINE OIL LEVEL SENSOR 

    See step  4

  5. REMOVE OIL PUMP BRACKET 

    Refer to PROCEDURE - Step 60

  6. REMOVE ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 62

  7. REMOVE OIL PUMP ASSEMBLY 
    1. Remove the 3 bolts and oil pump assembly from the stiffening crankcase assembly.
      GTY754233Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE STIFFENING CRANKCASE ASSEMBLY 

    Refer to PROCEDURE - Step 64

Diesel-Data.com