Removal [12/2019 - 10/2022]: Procedure

for A25A-FXS: Refer to REMOVAL [12/2019 - 10/2022]

for 2GR-FKS: Refer to REMOVAL [12/2019 - 09/2020] , or refer to REMOVAL [09/2020 - 10/2022]

1. Remove the nut and front stabilizer link assembly LH from the front stabilizer bar sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   Do not damage the boot of the ball joint.

   HINT: 

   If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.

HINT: 

Perform the same procedure as for the LH side.

1. Remove the 4 bolts and front stabilizer bar sub-assembly from the front frame assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002