DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension System (Front) - Service Information >> Front Stabilizer Bar >> Removal [11/2023 - ] >> Procedure

Removal [11/2023 - ]: Procedure

  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE 

    for A25A-FXS: Refer to REMOVAL [11/2023 - ]

    for T24A-FTS: Refer to REMOVAL [11/2023 - ]

  2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH 
    1. Remove the nut and front stabilizer link assembly LH from the front stabilizer bar sub-assembly.
      GTY906559Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not damage the boot of the ball joint.

      HINT: 

      If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.

  3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH 

    HINT: 

    Perform the same procedure as for the LH side.

  4. REMOVE STABILIZER PROTECTOR (for T24A-FTS) 
    1. Remove the clip.
      GTY1112510Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the stabilizer protector from the front stabilizer bar.
  5. REMOVE FRONT STABILIZER BAR SUB-ASSEMBLY 
    1. Remove the 4 bolts and front stabilizer bar sub-assembly from the front frame assembly.
      GTY906560Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Diesel-Data.com