DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Electric Parking Brake System - Service Information >> Electric Parking Brake Actuator >> On-Vehicle Inspection [12/2019 - ] >> Procedure

On-Vehicle Inspection [12/2019 - ]: Procedure

  1. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY 
    1. With the ignition switch ON and the wheels not contacting the ground, operate the electric parking brake switch assembly to check the condition of the rear wheels when the electric parking brake is operating and not operating.
      OK:

      Assembly Status Condition of Rear Wheels
      Lock Rear wheels cannot be rotated
      Release Rear wheels can be rotated
    2. Pull the electric parking brake switch assembly to the lock side for approximately 1 second and check that the parking brake indicator light (red) turns on.
    3. Push the electric parking brake switch assembly to the release side for approximately 1 second and check that the parking brake indicator light (red) turns off.
    4. At this time, check that the brake warning light / yellow (minor malfunction) does not turn on.
Diesel-Data.com