DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Electric Parking Brake System - Service Information >> Electric Parking Brake Actuator >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

  1. INSTALL PARKING BRAKE ACTUATOR ASSEMBLY 
    1. Apply a light coat of lithium soap base glycol grease to a new O-ring.
    2. Install the O-ring to the rear disc brake cylinder assembly.
      NOTE:

      Make sure to replace the O-ring with a new one when installing the parking brake actuator assembly.

    3. Using a 5 mm hexagon socket wrench, install the parking brake actuator assembly to the rear disc brake cylinder assembly with the 2 bolts.

      Torque: 8.4 N.m (86 kgf/cm, 74 in.lbf) 

  2. CONNECT NO. 2 PARKING BRAKE WIRE ASSEMBLY 
    1. Connect the No. 2 parking brake wire assembly connector to the parking brake actuator assembly.
  3. INSTALL REAR WHEEL 

    Refer to INSTALLATION [12/2019 - 10/2022] , or refer to INSTALLATION [10/2022 - ]

Diesel-Data.com