DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Rear) - Service Information >> Rear Brake >> Disassembly [12/2019 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING:

If the rear disc brake cylinder assembly has been disassembled, perform air bleeding for the rear disc brake cylinder assembly.

for Gasoline Model: See step  14

for HV Model: See step  15

NOTE:
  • Make sure not to scratch, damage or apply excessive force to any of the internal components of the rear disc brake cylinder.
  • To prevent rusting on the inside of the rear disc brake cylinder, perform the rear disc brake piston removal and installation quickly.
  • Do not clean the interior of the rear disc brake cylinder with brake cleaner.
  • Do not remove any parts unless specifically instructed to do so, and only remove the parts indicated.
  • Make sure to enter pad replacement mode before removing the rear disc brake cylinder assembly.

    for Gasoline Model: Refer to TEST MODE PROCEDURE [12/2019 - ]

    for HV Model: Refer to TEST MODE PROCEDURE [12/2019 - ]

Diesel-Data.com