DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Parking Assist Monitor System - Diagnostics - Introduction >> Parking Assist Monitor System >> Initialization [12/2019 - 10/2022] >> Initialization [12/2019 - 10/2022]

Initialization [12/2019 - 10/2022]

  1. INITIALIZE PARKING ASSIST MONITOR SYSTEM 
    1. When the "!" mark is displayed on the radio and display receiver assembly, correct the steering angle neutral point using the following method.
      1. Fully turn the steering wheel to the right and left on level ground.
        NOTE:

        Memorizing the steering angle neutral point must be carried out with the engine running*1, hybrid system operating*2. Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.

        1. *1: for Gasoline Model
        2. *2: for HV Model

        HINT: 

        If the "!" mark is displayed on the image of the area behind the vehicle with the steering wheel fully turned to the right or left, perform "Steering Angle Setting in Calibration".

        Refer to CALIBRATION [12/2019 - 10/2022] 

Diesel-Data.com