Freeze Frame Data [10/2022 - ]

HINT: 

• Freeze frame data is stored at the time when DTCs are detected.
• When freeze frame data at the time it is stored that a DTC is detected, data is not updated or cleared until the stored data is cleared (Clear DTCs).

1. CHECK FREEZE FRAME DATA 
   1. According to the display on the GTS, display the freeze frame data for the selected DTC.

      Chassis > Rear Camera 

      Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
      Total Distance Traveled	Total distance traveled	1 to 999999	Same as actual total distance traveled	For the unit, refer to "Total Distance Traveled - Unit"
      Total Distance Traveled - Unit	Total distance traveled unit	km or mile	km: km mile: mile	-
      Steering Angle	Steering angle	-3276.8 to 3276.7 deg	Steering left: Changes positively continuously Steering right: Changes negative continuously	-
      Vehicle Speed	Vehicle speed	0 to 655.35 km/h	Equivalent to actual vehicle speed	-
      EPS Steering Angle Value	EPS steering angle value	-3276.8 to 3276.7 deg	Steering left: Changes positively continuously Steering right: Changes negative continuously	-
      Target Steering Angle Value (SBW)	Target steering angle value (SBW)	-3276.8 to 3276.7 deg	Steering left: Changes positively continuously Steering right: Changes negative continuously	-

2. CLEAR FREEZE FRAME DATA 
   NOTE:

   Clearing the DTCs will also clear the freeze frame data.

   1. Clear the DTCs and freeze frame data.

      Chassis > Rear Camera > Clear DTCs