DTC B1474-96: A/C Inverter Component Internal Failure [11/2023 - ]: Description

WARNING: This page is about a different variant/trim than selected.

If abnormal current in the A/C inverter output high voltage output circuit or a malfunction of temperature sensor in the compressor with motor assembly is detected, compressor control will be stopped and this DTC will be stored.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Memory	DTC Output from	Priority
B1474-96	A/C Inverter Component Internal Failure	Diagnosis Condition: Ignition switch ON Malfunction: Compressor with motor assembly internal malfunction (A/C inverter output system current detection circuit or overheat detection system thermistor) Detection Time: -	Compressor with motor assembly	Memorized	Air Conditioner	A

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Memory

DTC Output from

Priority

B1474-96

A/C Inverter Component Internal Failure

Diagnosis Condition:

Ignition switch ON

Malfunction:

Compressor with motor assembly internal malfunction (A/C inverter output system current detection circuit or overheat detection system thermistor)

Detection Time:

Compressor with motor assembly

Memorized

Air Conditioner

DTC DETECTION CONDITION COMBINATION TABLE

		Vehicle Condition
		Pattern 1	Pattern 2
Diagnosis Condition	Ignition switch ON	◦	◦
Malfunction	Compressor with motor assembly internal malfunction (A/C inverter output system current detection circuit)	◦	-
Malfunction	Compressor with motor assembly internal malfunction (A/C inverter overheat detection system thermistor)	-	◦
Detection Time		-	-
Trip Count		1 trip	1 trip

HINT:

If the conditions of either of these patterns are detected, a DTC will be stored.