DTC B147D-11: Rear Right Room Temperature Sensor Circuit Short to Ground [11/2023 - ]: Procedure

1. Clear the DTCs.

   Body Electrical > Air Conditioner > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

Pre-procedure1

1. Turn the ignition switch off.
2. Disconnect the No. 2 room temp. sensor (cooler thermistor) connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	No. 2 Room Temp. Sensor (Cooler Thermistor)
   *2	Air Conditioning Amplifier Assembly

3. Turn the ignition switch to ON and wait for 4 seconds or more.

   Procedure1

4. Check for DTCs.

   Body Electrical > Air Conditioner > Trouble Codes 

   Result

   Result	Proceed to
   B147D-15 is output	A
   B147D-11 is output	B

   Post-procedure1

5. None

Result: 

A 

REPLACE NO. 2 ROOM TEMP. SENSOR (COOLER THERMISTOR) 

Refer to REMOVAL [11/2023 - ]

Result: 

B 

See step  3

Pre-procedure1

1. Disconnect the M16 No. 2 room temp. sensor (cooler thermistor) connector.
2. Disconnect the H65 air conditioning amplifier assembly connector.

   Procedure1

3. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   M16-1 (+) or H65-8 (TR) - Other terminals and body ground	Always	10 kΩ or higher
   M16-2 (-) or H65-14 (SG-8) - Other terminals and body ground	Always	10 kΩ or higher

   Result

   Proceed to
   OK
   NG

   Post-procedure1

4. None

Result: 

OK 

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY 

Refer to REMOVAL [11/2023 - ]

Result: 

NG 

REPAIR OR REPLACE HARNESS OR CONNECTOR