Diagnosis System [12/2019 - 11/2023]
WARNING: This page is about a different variant/trim than selected.
- DLC3 (Data Link Connector 3)
- Check the DLC3.
Refer to GENERAL INFORMATION [12/2019 - ]
- Check the DLC3.
- AUXILIARY BATTERY VOLTAGE
Standard Voltage
Switch Condition Specified Condition Ignition switch ON 11 to 14 V - If voltage is below 11 V, recharge or replace the auxiliary battery.NOTE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Refer to PRECAUTION [12/2019 - 11/2023]
- If voltage is below 11 V, recharge or replace the auxiliary battery.