Diagnosis System [11/2023 - ]

WARNING: This page is about a different variant/trim than selected.

DLC3 (Data Link Connector 3)
1. Check the DLC3.
  Refer to GENERAL INFORMATION [12/2019 - ]

AUXILIARY BATTERY VOLTAGE

Standard Voltage

Switch Condition	Specified Condition
Ignition switch ON	11 to 14 V

If voltage is below 11 V, recharge or replace the auxiliary battery.
NOTE:
- After the ignition switch is turned off, there may be a waiting time before disconnecting the auxiliary negative (-) battery terminal.
  Refer to BEFORE DISCONNECTING BATTERY [11/2023 - ]
- When disconnecting and reconnecting the auxiliary battery.
  HINT:
  
  When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
  
  Refer to AUTOMATIC LEARNING CHART [11/2023 - ]