Utility [12/2019 - 11/2023]

HINT: 

• With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.
• You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.

1. Connect the GTS to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the GTS on.
4. Clear the DTCs even if no DTCs are stored.

   Body Electrical > Clearance Warning > Clear DTCs 

5. Turn the ignition switch off and wait for 2 minutes or more.
6. Turn the ignition switch to ON.
7. Perform the DTC judgment driving pattern to run the DTC judgment.
8. Enter the following menus: Body Electrical / Clearance Warning / Utility / All Readiness.

   Body Electrical > Clearance Warning > Utility 

   Tester Display
   All Readiness

9. Input the DTCs to be confirmed.
10. Check the DTC judgment result.

    GTS Display	Description
    Normal	DTC judgment completed System normal
    Abnormal	DTC judgment completed System abnormal
    Incomplete	DTC judgment not completed Perform the driving pattern

    If the judgment result shows Incomplete, perform the DTC confirmation driving pattern again.

11. Turn the ignition switch off.