DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Road Sign Assist System - Diagnostics - Introduction >> Road Sign Assist System >> Customize Parameters [12/2019 - ] >> Customize Parameters [12/2019 - ]

Customize Parameters [12/2019 - ]

  1. CUSTOMIZE ROAD SIGN ASSIST SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the multi-information display
      1. Turn the ignition switch to ON.
      2. Select the setting by referring to the table below.
      3. Using the steering pad switches, change the customize settings.

        HINT: 

        Each item is displayed on the "Setting" tab on the multi-information display.

        ROAD SIGN ASSIST SETUP

        Display Description Setting Default Relevant ECU
        RSA Road sign assist function setting ON / OFF ON Forward recognition camera
        Notification Method*1 Above Speed Limit Excess speed notification method setting No Notification / Only Visual / Visual & Audio Only Visual Forward recognition camera
        Others Other notification method setting (No-entry notification)*2 No Notification / Only Visual / Visual & Audio Only Visual Forward recognition camera
        Notification Level Excess speed notification level setting 10 km/h (5 MPH) / 5 km/h (3 MPH) / 2 km/h (1 MPH) 2 km/h (1 MPH) Forward recognition camera

        *1: Display contents differ depending on the country.

        *2: w/ Navigation System

Diesel-Data.com