DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column - Service Information >> Steering Pad Switch >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 4 claws and 3 pins to install the steering pad switch assembly.
    2. Install the 2 screws.

      Torque: 2.4 N.m (24 kgf/cm, 21 in.lbf) 

    3. Connect the steering pad switch connector to the spiral cable with sensor sub-assembly.
  2. INSTALL HORN BUTTON ASSEMBLY 

    Refer to INSTALLATION [12/2019 - 10/2022] , or refer to INSTALLATION [10/2022 - 11/2023] , or refer to INSTALLATION [11/2023 - ]

Diesel-Data.com