Driver Side Seat Belt Warning Light does not Operate [11/2023 - ]: Procedure
- CHECK DTC OUTPUT (AIRBAG SYSTEM)
- Clear the DTCs.
Body Electrical > SRS Airbag > Clear DTCs
- Check for DTCs.
Body Electrical > SRS Airbag > Trouble Codes
Result
Result Proceed to DTCs are not output A DTCs are output B
Result:
B
GO TO AIRBAG SYSTEM. Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2023 - ]
Result:
A
See step 2
- Clear the DTCs.
- READ VALUE USING GTS
- Read the Data List according to the display on the GTS.
Body Electrical > SRS Airbag > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Driver Seat Buckle Switch Status Driver seat belt buckle switch Unknown, Unbuckle, Buckle, Malfunction Unknown: Data is not determined
Unbuckle: Front driver seat belt buckle switch unfastened
Buckle: Front driver seat belt buckle switch fastened
Malfunction: Front driver seat belt buckle switch is malfunctioning- Body Electrical > SRS Airbag > Data List
Tester Display Driver Seat Buckle Switch Status Result
Result Proceed to Unset or Set is displayed on the GTS according to the driver seat belt condition A Unset or Set is not displayed correctly on the GTS according to the driver seat belt condition B NG is displayed on the GTS C
Result:
A
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - ]
Result:
B
REPLACE FRONT SEAT INNER BELT ASSEMBLY LH
for Power Seat: Refer to REMOVAL [11/2023 - ]
for Manual Seat: Refer to REMOVAL [11/2023 - ]
Result:
C
REPLACE AIRBAG SENSOR ASSEMBLY. Refer to REMOVAL [11/2023 - ]
- Read the Data List according to the display on the GTS.