Customize Parameters [12/2019 - ]

CUSTOMIZE WIPER AND WASHER SYSTEM

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

Select the setting by referring to the table below.

Wiper

Tester Display	Description	Default	Setting	ECU
Auto Wiper	Function to enable AUTO wiper operation	Avail	0:Avail, 1:Not Avl	Rain sensor
Rear Wiper Stop in Back Door/Trunk Lid Open	Function to enable the back door open linked rear wiper suspend function	Not Available	0:Not Available, 1:Available	Main body ECU (Multiplex network body ECU)
Rear Wiper Washer Function	Function to enable the rear washer linked rear wiper operation function	Available	0:Not Available, 1:Available	Main body ECU (Multiplex network body ECU)
Auto Rear Wiper in Reverse Setting	Function to enable the R shift position linked rear wiper operation function	Once	00:Not Available, 10:Once, 11:Continuance	Main body ECU (Multiplex network body ECU)

HINT:

Changes to the customize settings will not be applied until the ignition switch is turned off then ON.