DTC P060B-1C: Analog to Digital Converter Circuit Voltage Out of Range; DTC P060B-49: Analog to Digital Converter Internal Electronic Failure; DTC P060B-71: Analog to Digital Converter Actuator Stuck [11/2023 - ]: Procedure

1. Clear the DTC.

   Powertrain > Stop and Start > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Turn the ignition switch off and wait for 30 seconds or more.
2. Start the engine.
3. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
4. Read the DTCs.

   Powertrain > Stop and Start > Trouble Codes 

   Result

   Result	Proceed to
   DTC P060B-1C, P060B-49 or P060B-71 is output	A
   DTC P060B-1C, P060B-49 or P060B-71 and other DTCs are output	B
   DTCs are not output	C

Result: 

A 

REPLACE ENGINE STOP AND START ECU. Refer to  REMOVAL [11/2023 - ] 

Result: 

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [11/2023 - ] 

Result: 

C 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - ]