DTC P1545-63: Starter Exceed Limited Number [12/2019 - 10/2022]: Procedure

1. According to the display on the GTS, read the Data List.

   Powertrain > Stop and Start > Data List 

   Tester Display
   Starter Operation #

   Result

   Result	Proceed to
   384000 or more (Displays 1000000 or more)*	A
   Below 384000	B

   HINT: 

   *: If "Starter Operation #" displays 1000000 or more, it is necessary to replace the engine stop and start ECU as there is an internal malfunction in the ECU.

Result: 

B 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - ] 

Result: 

A 

See step  2

Refer to REMOVAL [12/2019 - 09/2020] , or refer to REMOVAL [09/2020 - 10/2022]

HINT: 

• When the starter assembly is replaced, "ST relay" must be also replaced.
• If "Starter Operation #" displays 1000000 or more, the engine stop and start ECU must also be replaced.

  Refer to REMOVAL [12/2019 - 10/2022]

• Clear the number of starter operations by performing "Starter Exchange" using the GTS.

  Refer to REGISTRATION [12/2019 - 10/2022]

Result

Result: 

NEXT 

END