DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wireless Charging System - Diagnostics & Circuit Tests >> Wireless Charging System >> Wireless Charger Illumination Circuit [10/2022 - 11/2023] >> Procedure

Wireless Charger Illumination Circuit [10/2022 - 11/2023]: Procedure

  1. CHECK HARNESS AND CONNECTOR (ILLUMINATION SIGNAL) 
    1. Disconnect the H116 mobile wireless charger cradle assembly connector.
    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage

      Tester Connection Condition Specified Condition
      H116-7 (TAIL) - Body ground Taillight off Below 1 V
      Ignition switch off, taillight on 11 to 14 V

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [10/2022 - 11/2023]  

    Result: 

    NG 

    REPAIR OR REPLACE HARNESS OR CONNECTOR 

Diesel-Data.com