DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> My Settings System - Diagnostics & Symptom Tests >> My Settings System >> How To Proceed With Troubleshooting [11/2023 - ] >> Procedure

How To Proceed With Troubleshooting [11/2023 - ]: Procedure

  1. VEHICLE BROUGHT TO WORKSHOP 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  2

  2. CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  3

  3. READ AND SAVE VEHICLE CONTROL HISTORY (ROB) 
    NOTE:
    • If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before vehicle control history (RoB) has been read and saved, the vehicle control history (RoB) information could be lost.
    • The vehicle control history (RoB) function uses the current system time of the GTS and the time counter inside the controlling ECU to calculate the times shown in the vehicle control history (RoB). For this reason, before reading the vehicle control history (RoB), first make sure that the GTS system clock is accurately set to the current time.
    1. Read and save vehicle control history (RoB) using the GTS.

      Body Electrical > Main Body > Utility 

      Tester Display
      Vehicle Control History (RoB)

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  4

  4. INSPECT AUXILIARY BATTERY VOLTAGE 
    1. Measure the auxiliary battery voltage with the ignition switch off.

      Standard Voltage

      11 to 14 V

      If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  5

  5. CHECK CAN COMMUNICATION SYSTEM* 
    1. Use the GTS to check if the CAN communication system is functioning normally.

      For HV Model: Refer to DIAGNOSIS SYSTEM [11/2023 - ]

      For Gasoline Model: Refer to DIAGNOSIS SYSTEM [11/2023 - ]

      Result

      Result Proceed to
      CAN communication system DTCs are not output. A
      CAN communication system DTCs are output. B

    Result: 

    B 

    GO TO CAN COMMUNICATION SYSTEM 

    For HV Model: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2023 - ]

    For Gasoline Model: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2023 - ]

    Result: 

    A 

    See step  6

  6. PROBLEM SYMPTOMS TABLE 
    1. Refer to Problem Symptoms Table.

      Refer to PROBLEM SYMPTOMS TABLE [11/2023 - ] 

      Result

      Result Proceed to
      Fault is not listed in Problem Symptoms Table (Fault can be simulated) A
      Fault is not listed in Problem Symptoms Table (Fault cannot be simulated) B
      Fault is listed in Problem Symptoms Table C

    Result: 

    B 

    CHECK FOR INTERMITTENT PROBLEMS. Refer to  CHECK FOR INTERMITTENT PROBLEMS [11/2023 - ]  

    Result: 

    C 

    See step  8

    Result: 

    A 

    See step  7

  7. OVERALL ANALYSIS AND TROUBLESHOOTING* 
    1. Data List / Active Test

      Refer to DATA LIST / ACTIVE TEST [11/2023 - ] 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  8

  8. ADJUST, REPAIR OR REPLACE 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  9

  9. CONFIRMATION TEST 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    END 

Diesel-Data.com