DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tire Pressure Warning System - Service Information >> Tire Pressure Warning Receiver >> Installation [12/2019 - 11/2023] >> Procedure

Installation [12/2019 - 11/2023]: Procedure

  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER 
    NOTE:
    • Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.
    • If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.
    1. Connect the connector.
    2. Engage the 2 guides and install the tire pressure warning ECU and receiver with the bolt.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH 

    Refer to INSTALLATION [12/2019 - 11/2023]

  3. REGISTER TRANSMITTER ID 

    Refer to REGISTRATION [12/2019 - 11/2023]

  4. INSPECT TIRE PRESSURE WARNING SYSTEM 

    Refer to TEST MODE PROCEDURE [12/2019 - 11/2023]

  5. PERFORM INITIALIZATION 

    Refer to INITIALIZATION [12/2019 - 11/2023]

Diesel-Data.com