Removal [11/2023 - ]: Procedure

Refer to REMOVAL [10/2022 - ]

1. Remove the tire valve cap and valve core to release the air from the tire.
   NOTE:

   Keep the removed tire valve cap.

2. After ensuring that a sufficient amount of air has been released, remove the nut and washer used to secure the tire pressure warning valve and transmitter. Then drop the tire pressure warning valve and transmitter with the grommet into the tire.

   HINT: 

   The grommet may remain attached to the rim.

3. After dropping the tire pressure warning valve and transmitter into the tire, disengage the bead using the shoe of a tire remover.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	Tire
   *a	Shoe
   *b	10 to 20 mm (0.394 to 0.787 in.)

   NOTE:

   • Be careful as the tire pressure warning valve and transmitter may become damaged due to interference between the sensor and tire bead.
   • Set the tire remover shoe as shown in the illustration.
4. Separate the upper bead.
5. Take out the tire pressure warning valve and transmitter with the grommet from the tire and separate the lower bead.
6. Remove the grommet from the tire pressure warning valve and transmitter.