Caution / Notice / Hint
NOTE:
- When using the GTS with the ignition switch off, connect the GTS to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins. Then select the vehicle type under manual mode and enter the following menus: Body Electrical / Smart Key. While using the GTS, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the GTS and the vehicle.
- Before performing the inspection, check that DTC B1242 (wireless door lock control) is not output.
- Before replacing the certification ECU (smart key ECU assembly), refer to Registration.
Refer to REGISTRATION [12/2019 - 10/2021] , or refer to REGISTRATION [10/2021 - 10/2022] , or refer to REGISTRATION [10/2022 - 11/2023]
- After performing repairs, confirm that no DTCs are output by performing "DTC Output Confirmation Operation".