DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Smart Key System (For Start, HV) - Diagnostic Codes (1 Of 2)) >> SMART KEY SYSTEM (for Start Function, HV Model) >> DTC B2275-11: Starter Circuit Short to Ground; DTC B2275-12: Starter Circuit Short to Battery [11/2023 - ] >> Description

DTC B2275-11: Starter Circuit Short to Ground; DTC B2275-12: Starter Circuit Short to Battery [11/2023 - ]: Description

WARNING: This page is about a different variant/trim than selected.

This DTC is stored when a malfunction is detected in the starter circuit inside the certification ECU (smart key ECU assembly).

DTC No. Detection Item DTC Detection Condition Trouble Area Note
B2275-11 Starter Circuit Short to Ground Certification ECU (smart key ECU assembly) internal HV activation request output circuit malfunction or external circuit malfunction (1-trip detection logic*)
  • Certification ECU (smart key ECU assembly)
  • Hybrid vehicle control ECU
  • Wire harness or connector
DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait 10 seconds or more, then start the hybrid control system 3 times.
B2275-12 Starter Circuit Short to Battery Certification ECU (smart key ECU assembly) internal HV activation request output circuit malfunction or external circuit malfunction (1-trip detection logic*)
  • Certification ECU (smart key ECU assembly)
  • Hybrid vehicle control ECU
  • Wire harness or connector
DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait 10 seconds or more, then start the hybrid control system 3 times.
  1. *: Only detected while a malfunction is present and the ignition switch is ON.
VEHICLE CONDITION AND FAIL-SAFE FUNCTION WHEN MALFUNCTION DETECTED

Vehicle Condition when Malfunction Detected Fail-safe Function when Malfunction Detected
  • The power source mode changes to ON (READY) even though the hybrid control system is not started.
  • The power source mode does not change to ON (READY) even though the hybrid control system is started.
-
RELATED DATA LIST AND ACTIVE TEST ITEMS

DTC No. Data List and Active Test
B2275-11
B2275-12
-