DTC P0087-00: Fuel Rail / System Pressure - Too Low [12/2019 - 10/2022]: Description

The high-pressure direct injection fuel system consists of a spill control valve, check valve, fuel relief valve, fuel pressure sensor, fuel pump assembly (for high pressure side) and fuel injector assemblies (for direct injection). The spill control valve adjusts the return volume of high-pressure fuel. The check valve mechanically opens and closes the paths to the fuel delivery pipes. The relief valve releases the fuel back to the fuel tank if there is a malfunction in the high-pressure fuel system. The fuel pump assembly (for high pressure side) is installed to the cylinder head cover (bank 1) and operated by a cam installed to the end of the exhaust camshaft.

Rotation of the camshaft moves the pump plunger inside the fuel pump assembly (for high pressure side) up and down, pressurizing the fuel. The pressurized fuel opens the check valve and is pumped into the fuel delivery pipe. The ECM controls the spill control valve to adjust the fuel pressure between 2 and 25 MPa (20 and 255 kgf/cm² ) and monitors signals from the fuel pressure sensor (for high pressure side) to maintain the target fuel pressure.