Typical Enabling Conditions
ALL
| Monitor runs whenever the following DTCs are not stored | None |
P2102
| All of the following conditions are met | - |
| Command to electronic throttle actuator | On |
| Output duty cycle | 80% or higher |
| Electronic throttle actuator power supply voltage | 8 V or higher |
| Motor current change during last 0.016 seconds | Less than 0.2 A |
P2103
| Both of the following conditions are met | - |
| Command to electronic throttle actuator power | On |
| Either of the following conditions is met | 1 or 2 |
| 1. Electronic throttle actuator power supply voltage | 8 V or higher |
| 2. Electronic throttle actuator power | On |