DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Stop And Start System - Service Information >> Engine Stop And Start Solenoid Filter >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

  1. INSTALL ENGINE STOP AND START SOLENOID FILTER 
    1. Install the engine stop and start solenoid filter with the nut.

      Torque: 5.5 N.m (56 kgf/cm, 49 in.lbf) 

    2. Connect the engine stop and start solenoid filter connector.
  2. INSTALL INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER NO. 1 

    Refer to INSTALLATION [12/2019 - 10/2022] , or refer to INSTALLATION [10/2022 - 11/2023] , or refer to INSTALLATION [11/2023 - ]

Diesel-Data.com