DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System (Except HV) - Diagnostic Codes (3 Of 3), Symptom Tests & Circuit Tests >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model) >> Brake Hold Standby Indicator Light Circuit [10/2022 - ] >> Description

Brake Hold Standby Indicator Light Circuit [10/2022 - ]: Description

The brake hold standby indicator light turns on if brake hold control is possible when the following conditions required for operation standby are met and the brake hold switch (electric parking brake switch assembly) is pressed while the ignition switch is ON.

  1. Conditions required for operation standby:
    1. The driver door is closed.
    2. The driver seat belt is fastened.
    3. The system is normal.

HINT: 

If a malfunction occurs in one of the following systems, the brake hold operated indicator light will blink. If this occurs, perform troubleshooting on the malfunctioning system.

Diesel-Data.com