Brake Hold Operated Indicator Light Circuit [12/2019 - 10/2022]: Procedure

1. Check that the brake hold standby indicator light operates normally.

   Refer to Brake Hold Standby Indicator Light Circuit [12/2019 - 10/2022] 

2. If the brake hold operated indicator light does not illuminate even though the brake hold standby indicator light is illuminated, check that the following brake hold operation (brake fluid pressure is being maintained) conditions are met.
   1. System is in operation standby state (brake hold standby indicator light is illuminated).
   2. Shift position is not P or R.
   3. Driver is depressing brake pedal and vehicle is fully stopped.
   4. Driver is not depressing accelerator pedal.
   5. Vehicle is not on steep decline.
   6. The parking brake is not engaged.

   HINT: 

   If a malfunction occurs in one of the following systems, the brake hold operated indicator light will blink. If this occurs, perform troubleshooting on the malfunctioning system.

   • Brake system
   • Electric parking brake system

   Result

   Proceed to
   NEXT

Result: 

NEXT 

INSPECT METER / GAUGE SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - ]