Data List / Active Test [11/2023 - ]
- DATA LIST NOTE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- Read the Data List.
Body Electrical > Central Gateway > Data List
Tester Display Total Distance Traveled Total Distance Traveled - Unit IG2 SW/IGR SW IG1 SW/IGP SW ACC SW +B Voltage Body Electrical > Central Gateway > Data List
Tester Display Measurement Item Range Normal Condition Total Distance Traveled Total distance traveled Min.: 0 km (0 mile), Max.: 16777215 km (10425361 mile) - Total Distance Traveled - Unit Total Distance Traveled unit km or mile - IG2 SW/IGR SW Ignition switch ON signal (IGR terminal) OFF or ON OFF: Ignition switch ACC or off
ON: Ignition switch ONIG1 SW/IGP SW Ignition switch ON signal (IGP terminal) OFF or ON OFF: Ignition switch ACC or off
ON: Ignition switch ONACC SW Ignition switch ACC signal (ACC terminal) OFF or ON OFF: Ignition switch off
ON: Ignition switch ACC or ON+B Voltage battery voltage (BATT terminal) Over 8 V or Under 8 V Over 8 V: battery voltage 8 V or higher
Under 8 V: battery voltage below 8 V
- Read the Data List.