DTC P2614-01: Camshaft Position Signal Output "A" General Electrical Failure [12/2019 - 10/2022]: Procedure

Refer to REMOVAL [12/2019 - 10/2022]

HINT: 

Perform "Inspection After Repair" after replacing the cam timing control motor with EDU assembly.

Refer to INITIALIZATION [12/2019 - 10/2021] , or refer to INITIALIZATION [10/2021 - ]

Result

Result: 

NEXT 

See step  2

1. Clear the DTCs.

   Powertrain > Engine > Clear DTCs 

2. Turn the ignition switch off and wait for at least 30 seconds.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Drive the vehicle in accordance with the driving pattern described in the Confirmation Driving Pattern.
2. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTC P2614-01 is output	B

Result: 

A 

END 

Result: 

B 

REPLACE ECM 

Refer to REMOVAL [12/2019 - 10/2022]