Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
P2111: THROTTLE ACTUATOR STUCK OPEN
| All of the following conditions are met | - |
| System guard* judge condition | On |
| Throttle actuator current | 2 A or higher |
| Duty-cycle to close throttle | 80% or higher |
P2112: THROTTLE ACTUATOR STUCK CLOSED
| All of the following conditions are met | - |
| System guard* judge condition | On |
| Throttle actuator current | 2 A or higher |
| Duty-cycle to open throttle | 80% or higher |
| *: System guard set when following conditions are met | - |
| Throttle actuator | On |
| Throttle actuator duty calculation | Executing |
| Throttle position sensor fail (P0121, P0122, P0123, P0222, P0223, P2135) | Not detected |
| Throttle actuator current-cut operation | Not executing |
| Throttle actuator power supply | 4 V or higher |
| Throttle actuator fail (P2102) | Not detected |