Caution / Notice / Hint
WARNING: This page is about a different variant/trim than selected.
NOTE:
- When a vehicle is brought into the workshop, leave it as it is. Do not change the vehicle condition. For example, do not tighten the fuel tank cap assembly.
- The GTS is required to conduct the following diagnostic troubleshooting procedure.
- Vehicle Control History may be stored in the hybrid vehicle control ECU if the engine is malfunctioning. Certain vehicle condition information is recorded when Vehicle Control History is stored. Reading the vehicle conditions recorded in both the Freeze Frame Data and Vehicle Control History can be useful for troubleshooting.
for AWD: Refer to VEHICLE CONTROL HISTORY [12/2019 - 11/2023]
for 2WD: Refer to VEHICLE CONTROL HISTORY [12/2019 - 11/2023]
(Select Powertrain in Health Check and then check the time stamp data.)
- If any "Engine Malfunction" Vehicle Control History item has been stored in the hybrid vehicle control ECU, make sure to clear it. However, as all Vehicle Control History items are cleared simultaneously, if any Vehicle Control History items other than "Engine Malfunction" are stored, make sure to perform any troubleshooting for them before clearing Vehicle Control History.
for AWD: Refer to VEHICLE CONTROL HISTORY [12/2019 - 11/2023]
for 2WD: Refer to VEHICLE CONTROL HISTORY [12/2019 - 11/2023]