DTC P16B0-9F: Actuator Cut Circuit Stuck Off [12/2019 - 10/2022]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CLEAR DTC
Result:
NEXT
See step 2
- READ OUTPUT DTC (DTC P16B0-9F)
- Disconnect the cable from the negative (-) auxiliary battery terminal and wait for 1 minute.
- Connect the cable to the negative (-) auxiliary battery terminal.
- Wait 1 second or more.
- Read the DTCs.
Powertrain > Engine > Trouble Codes
Result
Result Proceed to DTCs are not output A DTC P16B0-9F is output B
Result:
A
CHECK FOR INTERMITTENT PROBLEMS
Refer to CHECK FOR INTERMITTENT PROBLEMS [12/2019 - ]
Result:
B
REPLACE ECM
Refer to REMOVAL [12/2019 - 10/2022]