DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System - Service Information >> Millimeter Wave Radar Sensor >> Removal [12/2019 - 09/2020] >> Procedure

Removal [12/2019 - 09/2020]: Procedure

  1. REMOVE COOL AIR INTAKE DUCT SEAL 

    Refer to PROCEDURE - Step 1

  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY 
    1. Disconnect the connector.
      GTY923901Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and screw.
      GTY861584Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Bolt
      Screw
    3. Disengage the 2 guides and remove the millimeter wave radar sensor assembly.
      NOTE:

      Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.

Diesel-Data.com