DTC P06DA-13: Engine Oil Pressure Control Circuit Open [12/2019 - 10/2022]: Procedure

Refer to INSPECTION [12/2019 - ]

Result

Result: 

NG 

REPLACE OIL PRESSURE CONTROL VALVE ASSEMBLY 

Refer to REMOVAL [12/2019 - ]

Result: 

OK 

See step  2

1. Disconnect the oil pressure control valve assembly connector.
2. Disconnect the ECM connector.
3. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   C37-1 (OCV+) - C55-21 (VOP+)	Always	Below 1 Ω
   C37-2 (OCV-) - C55-20 (VOP-)	Always	Below 1 Ω
   C37-1 (OCV+) or C55-21 (VOP+) - Body ground and other terminals	Always	10 kΩ or higher
   C37-2 (OCV-) or C55-20 (VOP-) - Body ground and other terminals	Always	10 kΩ or higher

   Result

   Proceed to
   OK
   NG

Result: 

OK 

REPLACE ECM 

Refer to REMOVAL [12/2019 - 10/2022]

Result: 

NG 

REPAIR OR REPLACE HARNESS OR CONNECTOR