DTC P0340-31: Camshaft Position Sensor "A" Bank 1 or Single Sensor No Signal [12/2019 - 10/2022]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0340-11.
Refer to DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0340-31 | Camshaft Position Sensor "A" Bank 1 or Single Sensor No Signal | No camshaft position sensor (for intake camshaft) signal for 5 seconds at an engine speed of 600 rpm or higher (1 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P0340 |
Reference: Inspection using an oscilloscope.
Refer to DESCRIPTION