Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
P0136: AIR FUEL RATIO SENSOR (SENSOR 2) OUTPUT CURRENT MALFUNCTION
| Both of the following conditions are met | A and B |
| A. Continuous time of active rich air fuel ratio control*1 | 0.5 seconds or more |
| *1: Target air fuel ratio | 13.7 or less |
| B. Either of the following conditions is met | (a) or (b) |
| (a) Air fuel ratio sensor (sensor 2) current | 6 mA or more |
| (b) OSC (Oxygen Storage Capacity) of catalyst | More than 1.52 g |
P013A: AIR FUEL RATIO SENSOR (SENSOR 2) RESPONSE RATE DURING FUEL CUT FROM RICH CONDITION
| The amount of time it takes for the current of the air fuel ratio sensor (sensor 2) to increase to a certain amount during a fuel cut (Normalized) | 1 or more |