DTC P0115-2A: Engine Coolant Temperature Sensor 1 Signal Stuck in Range [12/2019 - 09/2020]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0115-2A)
- Read the DTCs.
Powertrain > Engine > Trouble Codes
Result
Result Proceed to DTC P0115-2A is output A DTC P0115-2A and other DTCs are output B HINT:
If any DTCs other than P0115-2A are output, troubleshoot those DTCs first.
Result:
B
GO TO DTC CHART . Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2019 - 09/2020]
Result:
A
See step 2
- Read the DTCs.
- INSPECT WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
- Inspect the water inlet with thermostat sub-assembly (thermostat opening temperature).
Refer to INSPECTION [12/2019 - 10/2021]
HINT:
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
Refer to INITIALIZATION [12/2019 - 10/2021]
Result
Proceed to OK NG
Result:
OK
REPLACE ENGINE COOLANT TEMPERATURE SENSOR
Refer to REMOVAL [12/2019 - 10/2022]
Result:
NG
REPLACE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
Refer to REMOVAL [12/2019 - 10/2021]
- Inspect the water inlet with thermostat sub-assembly (thermostat opening temperature).