Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
| All of the following conditions are met | - |
| Soak time | 7 hours or more |
| Auxiliary battery voltage | 10.5 V or higher |
| Time after engine start | Less than 20 seconds |
| Intake air temperature at hybrid system ready-to-drive | -10°C (14°F) or higher |
| Intake air temperature sensor circuit fail (P0112, P0113) | Not detected |
| No. 2 engine coolant temperature sensor circuit fail (P00B3, P00B4) | Not detected |
| Soak timer fail (P2610) | Not detected |