Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
| All of the following conditions are met | - |
| Engine coolant temperature | -10°C (14°F) or higher |
| Intake air temperature | -10°C (14°F) or higher |
| Atmospheric pressure sensor circuit fail (P2228, P2229) | Not detected |
| Manifold absolute pressure sensor circuit fail (P0107, P0108) | Not detected |
| Engine coolant temperature sensor circuit fail (P0117, P0118) | Not detected |
| Intake air temperature sensor circuit fail (P0112, P0113) | Not detected |
| Engine | Stall |
| Ignition switch | Off |
| Soak time | 50 minutes |
| Time after ECM power on | 60 to 65.625 seconds |
| Auxiliary battery voltage | 8 V or higher |