DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> TOYOTA Multi Operation Touch System - Diagnostics - Introduction >> TOYOTA Multi Operation Touch System >> Precaution [12/2019 - 10/2022] >> Precaution [12/2019 - 10/2022]

Precaution [12/2019 - 10/2022]

  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the terminal is reconnected.

    System Name See Procedure
    Stop and Start System (for Gasoline Model) Refer to INITIALIZATION [12/2019 - 09/2020] , or refer to INITIALIZATION [09/2020 - 10/2021] , or refer to INITIALIZATION [10/2021 - 10/2022]
    Lane Control System
    Parking Support Brake System
    Pre-collision System
    Lighting System (EXT) (w/ AFS)
    Parking Assist Monitor System
    Panoramic View Monitor System
    Power Door Lock Control System
    Power Back Door System
  2. PRECAUTION FOR TOYOTA MULTI OPERATION TOUCH SYSTEM 
    NOTE:

    When replacing the integration control sub-assembly, always replace it with a new one. If a integration control sub-assembly which was installed to another vehicle is used, the following may occur:

    • A communication malfunction DTC may be stored.
    • The integration control sub-assembly may not operate normally.
Diesel-Data.com