DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> TOYOTA Multi Operation Touch System - Diagnostics - Introduction >> TOYOTA Multi Operation Touch System >> Customize Parameters [12/2019 - 10/2022] >> Customize Parameters [12/2019 - 10/2022]

Customize Parameters [12/2019 - 10/2022]

  1. CUSTOMIZE TOYOTA MULTI OPERATION TOUCH SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the GTS.
      1. Connect the GTS to the DLC3.
      2. Turn the ignition switch to ON.
      3. Turn the GTS on.
      4. Enter the following menus: Customize Setting / Others.
      5. Select the setting by referring to the table below.

        Others 

        Tester Display Description Default Setting ECU
        Touch Panel Reaction Time Adjust (Multi Operation) Touch panel reaction time 140ms 00:40ms, 01:140ms, 10:170ms, 11:200ms Integration control sub-assembly
    2. Customizing with the integration control sub-assembly
      1. Turn the ignition switch to ON.
      2. Enter the "Setting" menu.
      3. Select the setting by referring to the table below.
        Display Description Default Setting Relevant ECU
        Slide Operation
        • ON: Flick function enabled
        • OFF: Flick function disabled
        		 ON ON or OFF Integration control sub-assembly
Diesel-Data.com