DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Acoustic Vehicle Alerting System - Diagnostic Codes & Symptom Tests >> Acoustic Vehicle Alerting System >> DTC B1350-13: Acoustic Vehicle Alerting Speaker Circuit Open; DTC B1350-19: Acoustic Vehicle Alerting Speaker Circuit Current Above Threshold [11/2023 - ] >> Procedure

DTC B1350-13: Acoustic Vehicle Alerting Speaker Circuit Open; DTC B1350-19: Acoustic Vehicle Alerting Speaker Circuit Current Above Threshold [11/2023 - ]: Procedure

  1. INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY 

    Refer to INSPECTION [10/2022 - ]

    Result

    Proceed to
    OK
    NG

    Result: 

    NG 

    REPLACE VEHICLE APPROACHING SPEAKER ASSEMBLY. Refer to  REMOVAL [10/2022 - ] 

    Result: 

    OK 

    See step  2

  2. CHECK HARNESS AND CONNECTOR (VEHICLE APPROACHING SPEAKER ASSEMBLY - VEHICLE APPROACHING SPEAKER CONTROLLER) 
    1. Disconnect the A50 vehicle approaching speaker controller connector.
    2. Disconnect the A12 vehicle approaching speaker assembly connector.
    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      A12-2 - A50-7 (SP+) Always Below 1 Ω
      A12-1 - A50-8 (SP-) Always Below 1 Ω
      A12-2 or A50-7 (SP+) - Body ground Always 10 kΩ or higher
      A12-1 or A50-8 (SP-) - Body ground Always 10 kΩ or higher

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE VEHICLE APPROACHING SPEAKER CONTROLLER. Refer to  REMOVAL [11/2023 - ] 

    Result: 

    NG 

    REPAIR OR REPLACE HARNESS OR CONNECTOR