Steering Pad Switch Circuit [11/2023 - ]: Procedure
- INSPECT STEERING PAD SWITCH ASSEMBLY
- Remove the steering pad switch assembly.
Refer to REMOVAL [11/2023 - ]
- Inspect the steering pad switch assembly.
Refer to INSPECTION [12/2019 - ]
Result
Proceed to OK NG
Result:
NG
REPLACE STEERING PAD SWITCH ASSEMBLY. Refer to REMOVAL [11/2023 - ]
Result:
OK
See step 2
- Remove the steering pad switch assembly.
- INSPECT SPIRAL CABLE SUB-ASSEMBLY
- Remove the spiral cable sub-assembly.
Refer to REMOVAL [11/2023 - ]
- Inspect the spiral cable sub-assembly.
Refer to INSPECTION [12/2019 - ]
Result
Proceed to OK NG
Result:
NG
REPLACE SPIRAL CABLE SUB-ASSEMBLY. Refer to REMOVAL [11/2023 - ]
Result:
OK
See step 3
- Remove the spiral cable sub-assembly.
- CHECK HARNESS AND CONNECTOR (SPIRAL CABLE SUB-ASSEMBLY - FORWARD RECOGNITION CAMERA AND BODY GROUND)
- Disconnect the R5 forward recognition camera connector.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition H24-6 (DIST) - R5-3 (LKSW) Always Below 1 Ω H24-6 (DIST) or R5-3 (LKSW) - Body ground Always 10 kΩ or higher Result
Result Proceed to OK (for HV Model) A OK (for Gasoline Model) B NG C
Result:
B
See step 5
Result:
C
REPAIR OR REPLACE HARNESS OR CONNECTOR
Result:
A
See step 4
- CHECK HARNESS AND CONNECTOR (SPIRAL CABLE SUB-ASSEMBLY - BODY GROUND)
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition H24-2 (ECC) - Body ground Always Below 1 Ω Result
Proceed to OK NG
Result:
OK
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE [11/2023 - ]
Result:
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
- Measure the resistance according to the value(s) in the table below.
- CHECK HARNESS AND CONNECTOR (SPIRAL CABLE SUB-ASSEMBLY - ECM)
- Disconnect the A83 ECM connector.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition H24-2 (ECC) - A83-47 (EPPM) Always Below 1 Ω H24-2 (ECC) or A83-47 (EPPM) - Body ground Always 10 kΩ or higher Result
Proceed to OK NG
Result:
OK
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE [11/2023 - ]
Result:
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR