DTC P0C76-00: Hybrid/EV Battery System Discharge Time Too Long [12/2019 - 11/2023]: Description
WARNING: This page is about a different variant/trim than selected.
For a description of the inverter.
Refer to DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P0C76-00 | Hybrid/EV Battery System Discharge Time Too Long | The inverter voltage (VH) does not drop during discharge. (Discharge: Offsetting of the residual pressure in the high-voltage side after ignition switch is turned off) (1 trip detection logic) |
|
Does not come on | Master Warning: Comes on |
HINT:
When the ignition switch is turned from ON (READY) to off, the MG ECU discharges voltage stored in the inverter by allowing current to flow to motor (MG2) without generating torque. When the vehicle is normal, VH voltage becomes approximately 0 V after discharging. If VH voltage exceeds a specified value, this DTC is stored.
RELATED DATA LIST
| DTC No. | Data List |
|---|---|
| P0C76-00 | VH-Voltage after Boosting |